Rust Remover B198 1L is a specially formulated acidic gel for the removal of rust, iron mould and old blood stains
on carpet and fabric.
For professional and industrial use only.
Rust Remover is ready-to-use. Shake before using. Always pre-test fibres and fabrics in
an inconspicuous location for suitability and colour fastness. Some fabrics and dyes
may be sensitive to acidic solutions.
Apply Rust Remover directly to the rust spot. Avoid over-application.
Allow several minutes contact time. Agitate gently during this time with a brush or
scraper.
Blot and extract area thoroughly with clear water. Repeat steps above if necessary.
Groom carpet or fabric to align fibres.
Note: Old rust spots will require longer contact time than fresh rust spots. Agitation
speeds rust spot removal. Thorough extraction will prevent re-appearance of rust spot.
• Professional rust remover for carpets, fabrics & most surfaces
• Economical and safe-to-use
• Does not require chemical neutralisation
• Clear viscous liquid
• Pleasant fragrance
• Ready-to-use
pH Concentrate: 1.0
pH Diluted: Not applicable
DANGER. Causes serious eye damage.
Causes skin irritation.
May be corrosive to metals.
Keep out of reach of children.
Wear protective gloves / protective clothing / eye protection / face protection.
IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER / doctor.
IF ON SKIN: Wash with plenty of water.
Absorb spillage to prevent material damage.
Please consult the Safety Data Sheet before using this product.